Cubic NDIR CO2 Sensor in Compliance with ASHRAE 62.1-2022
To improve energy efficiency in buildings, the latest published ASHRAE 62.1-2022 proposes measures to enhance building energy efficiency, notably raising CO2 measurement standards to ±75 ppm at 600, 1000, and 2500 ppm concentrations as the following shows,
6.2.6.1.3.4 CO2 sensors shall be certified by the manufacturer to be accurate within ±75 ppm at concentrations of 600, 1000, and 2500 ppm when measured at sea level at 77°F (25°C). Sensors shall be factory calibrated and certified by the manufacturer to require calibration not more frequently than once every five years. Upon detection of sensor failure, the system shall provide a signal that resets the ventilation system to supply the required minimum quantity of outdoor air (Vbz) to the breathing zone for the design zone population (Pz).
Under this context, to realize high-accuracy feature of CO2 sensors for ventilation systems becomes very critical.
In the basis of more than 20 years’ R&D accumulation and dedication, Cubic has established a gas sensing technology platform based on NDIR technology and developed NDIR CO2 sensors that can realize highly accurate measurement, fully compliant with ASHRAE precise measurement of ±75 ppm at concentrations of 600, 1000, and 2500 ppm. Cubic NDIR CO2 sensors also have advantages of long lifespan, auto-zero-calibration mechanism, and continuous monitoring capability to better realize meticulous control to improve indoor air quality and energy efficiency.
Simultaneously, complemented by a robust and reliable supply chain, Cubic capitalizes on the virtuous synergy of technological innovation, supply chain management, and lean production practices to effectively meet customers' burgeoning demands and provide holistic gas sensing solutions.
With 20 years of expertise in NDIR technology, Cubic, will pay continuous attention to policy shifts in ASHRAE Standards to provide qualified and reliable solutions to customers worldwide. Cubic will also devote its best efforts to the ventilation systems and HVAC application for more influential technological innovations.
Recently Posted
-
Natural Gas Metering Solutions
May 23, 2025Gas metering is essential for quantifying the volume of natural gas in energy sector, especially for flaring process. Accurate mea
Read More -
Natural Gas Composition & Calorific Value Solutions
May 23, 2025Following EU methane regulations, it also emphasize the importance of flare combustion efficiency. For instance, Article 17 m
Read More -
Cubic Advanced Sensor Technology for Wall-Mounted Ventilators Enhances Indoor Air Quality
May 22, 2025In the context of modern residential building design, there is an increasing focus on improving indoor air quality (IAQ). Pollutan
Read More -
Methane Emission Monitoring & Quantification Solutions
May 22, 2025Dedicated to the provision of efficient methane emissions solutions in energy sector, Cubic has developed a series of hi
Read More